Industrial and Systems Engineering - Analytics, B.S./Data Science and Analytics, M.S.

View Checksheet

Minimum Total Credit Hours: 156


Overall GPA - Combined and OU: 3.00

Major GPA - Combined and OU: 3.00

Curriculum GPA - Combined and OU: 3.00

Program Code: A532/F267 Q343

Bachelor of Science in Industrial and Systems Engineering accredited by the Engineering Accreditation Commission of ABET, https://www.abet.org, under the General Criteria and the Industrial Engineering and Similarly Named Engineering Programs Program Criteria.

In order to progress in your curriculum in the Gallogly College of Engineering, and as a specific graduation requirement, a grade of C or better is required in each course in the curriculum, including all prerequisite courses.

Major Requirements

Required Courses
ISE 2823Enterprise Engineering3
ISE 2311Computer Aided Design and Graphics Laboratory for Industrial Engineers1
ISE 2303Design and Manufacturing Process3
ISE 3293Applied Engineering Statistics3
ISE 3304Design and Manufacturing II4
ISE 4113Spreadsheet Dec Support Sys3
ISE 4553Data-Driven Decision Making I3
ISE 4623Deterministic Systems Models3
ISE 4223Fundamentals of Engineering Economy3
ISE 4563Quality & Reliability Engineering3
ISE 4633Probabilistic Systems Models3
ISE 4804Ergonomics in Systems Design4
ISE 4333 Production Systems/Operations3
ISE 5663Systems Analysis Using Simulation 13
ISE 4383Systems Evaluation3
ISE 5853Data-Driven Decision Making II 13
DSA 4513Database Management Systems 13
ISE 4393Capstone Design Project3
DSA 5113Advanced Analytics and Metaheuristics 13
Total Credit Hours57
1

These courses are dual-counted, fulfilling requirements for both the undergraduate and graduate degrees.

Major Support Requirements

Math and Science
MATH 2924Differential and Integral Calculus II4
MATH 2934Differential and Integral Calculus III4
MATH 2513Discrete Mathematical Structures3
PHYS 2524General Physics for Engineering and Science Majors4
Additional College Requirements
ENGR 1411Pathways to Engineering Thinking 11
C S 1323Introduction to Computer Programming for Programmers3
ENGR 2431Electrical Circuits1
ENGR 2461Thermodynamics1
ENGR 3441Fluid Mechanics1
CEES 2113Statics3
CEES 2153Mechanics of Materials3
C S 2334Programming Structures and Abstractions4
C S 2413Data Structures3
C S 3203Software Engineering3
Total Credit Hours38
1

Engineering transfer students may take ENGR 3511 in place of ENGR 1411.

Graduate Requirements

12 hours of graduate level courses that satisfy MS in data science and analytics requirements can be shared between BS and MS degrees.

Non-Thesis Option

Core DSA Courses 1
DSA/C S 5005Computing Structures5
DSA/C S 4513Database Management Systems 23
DSA/C S 4413Algorithm Analysis 23
DSA/ISE 5013Fundamentals of Engineering Statistical Analysis3
DSA/ISE 5103Intelligent Data Analytics3
DSA/ISE 5113Advanced Analytics and Metaheuristics3
Internship/Practicum
DSA/ENGR 5900Professional Practice4
Electives
Choose 3 hours of CS, ISE, or DSA electives3
Choose 6 additional hours of electives (which may be outside CS, ISE, or DSA)6
Total Credit Hours33
1

Core courses may be replaced with additional graduate electives at the discretion of the Graduate Liaison. 

2

Approved for graduate credit.

General Education and College Requirements

Courses designated as Core I, II, III, IV, or V are part of the General Education curriculum. Students must complete a minimum of 40 hours of General Education courses, chosen from the approved list, including at least one upper-division Gen. Ed. course outside of the student’s major. Courses graded P/NP will not apply.

A grade of C or better is required in each course in the curriculum, including all prerequisite courses.

UNIVERSITY-WIDE GENERAL EDUCATION (MINIMUM 40 HOURS) AND COLLEGE REQUIREMENTS
Core Area I: Symbolic and Oral Communication
English Composition
ENGL 1113Principles of English Composition3
ENGL 1213Principles of English Composition3
or EXPO 1213 Expository Writing
Language (0-10 hours in the same language)
This requirement can be met by two years of the same language in high school:0-10
Beginning Course (0-5 hours)
Beginning Course, continued (0-5 hours)
Mathematics
MATH 1914Differential and Integral Calculus I (Core I) 1, 24
Core Area II: Natural Science (including one laboratory)
PHYS 2514General Physics for Engineering and Science Majors (Core II) 24
CHEM 1315General Chemistry (Core II-Lab) 25
or CHEM 1335 General Chemistry I: Signature Course
Core Area III: Social Science
P SC 1113American Federal Government3
Choose one course 33
Core Area IV: Arts & Humanities
Artistic Forms
Choose one course 33
Western Culture
HIST 1483United States to 18653
or HIST 1493 United States, 1865 to the Present
Choose one course (excluding HIST 1483 and HIST 1493) 33
World Culture
Choose one course 33
Core Area V: First-Year Experience
Choose one course 33
Total Credit Hours40-50
1

MATH 1823, MATH 2423, MATH 2433, and MATH 2443 sequence can be substituted for MATH 1914MATH 2924, and MATH 2934

2

Major support requirements that also satisfy University General Education requirements.

3

To be chosen from the University-Wide General Education Approved Course List. Three of these hours must be upper-division (3000-4000). See list in the Class Schedule. 

Free Electives

Electives to bring total applicable hours to the minimum total required for the degree including a minimum of 40 upper-division hours.

Suggested Semester Plan of Study

Bachelor of Science in Industrial and Systems Engineering accredited by the Engineering Accreditation Commission of ABET, https://www.abet.org, under the General Criteria and the Industrial Engineering and Similarly Named Engineering Programs Program Criteria.

In order to progress in your curriculum in the Gallogly College of Engineering, and as a specific graduation requirement, a grade of C or better is required in each course in the curriculum, including all prerequisite courses.

Admission to the accelerated program is by application and requires a minimum OU GPA and combined GPA of 3.0. Students may enter the accelerated program based on the undergraduate degree pattern offered in the year they first enrolled in the Oklahoma State System of Higher Education or later. Students are eligible for graduate status upon graduation with the Bachelor of Science in Industrial Engineering.

Two college-level courses in a single world language are required; this may be satisfied by successful completion of 2 years in a single world language in high school. Students who must take language at the University will have an additional 6-10 hours of coursework.

Courses designated as Core I, II, III, IV or V are part of the General Education curriculum. Students must complete a minimum of 40 hours of General Education courses, chosen from the approved list.

Plan of Study Grid
Freshman
First SemesterCredit Hours
ENGL 1113 Principles of English Composition (Core I) 3
CHEM 1315 General Chemistry (Core II-Lab) 1 5
MATH 1914 Differential and Integral Calculus I (Core I) 2 4
ENGR 1411 Pathways to Engineering Thinking 3 1
Approved Elective: First-Year Experience (Core V) 4 3
 Credit Hours16
Second Semester
ENGL 1213
Principles of English Composition (Core I)
or Expository Writing
3
MATH 2924 Differential and Integral Calculus II 2 4
HIST 1483
United States to 1865 (Core IV)
or United States, 1865 to the Present
3
PHYS 2514 General Physics for Engineering and Science Majors (Core II) 4
C S 1323 Introduction to Computer Programming for Programmers 3
 Credit Hours17
Sophomore
First Semester
MATH 2934 Differential and Integral Calculus III 2 4
PHYS 2524 General Physics for Engineering and Science Majors 4
CEES 2113 Statics 3
ISE 2823 Enterprise Engineering 3
C S 2334 Programming Structures and Abstractions 4
 Credit Hours18
Second Semester
C S 2413 Data Structures 3
CEES 2153 Mechanics of Materials 3
ISE 2303 Design and Manufacturing Process 3
ISE 2311 Computer Aided Design and Graphics Laboratory for Industrial Engineers 1
ISE 3293 Applied Engineering Statistics 3
MATH 2513 Discrete Mathematical Structures 3
 Credit Hours16
Junior
First Semester
ISE 3304 Design and Manufacturing II 4
ISE 4113 Spreadsheet Dec Support Sys 3
ISE 4553 Data-Driven Decision Making I 3
ISE 4623 Deterministic Systems Models 3
C S 3203 Software Engineering 3
P SC 1113 American Federal Government (Core III) 3
 Credit Hours19
Second Semester
ISE 4223 Fundamentals of Engineering Economy 3
ISE 4563 Quality & Reliability Engineering 3
ISE 4633 Probabilistic Systems Models 3
ISE 4804 Ergonomics in Systems Design 4
ENGR 2461 Thermodynamics 1
ENGR 3441 Fluid Mechanics 1
Approved Elective: Artistic Forms (Core IV) 4 3
 Credit Hours18
Senior
First Semester
ISE 4333 Production Systems/Operations 3
ISE 5663 Systems Analysis Using Simulation 5 3
ISE 4383 Systems Evaluation 3
ISE 5853 Data-Driven Decision Making II 5 3
DSA 4513 Database Management Systems 5 3
ENGR 2431 Electrical Circuits 1
 Credit Hours16
Second Semester
DSA 5113 Advanced Analytics and Metaheuristics 5 3
ISE 4393 Capstone Design Project 3
Approved Elective: Social Science (Core IV) 4 3
Approved Elective: World Culture (Core IV) 4 3
Approved Elective: Western Culture (Core IV) 4 3
 Credit Hours15
Fifth Year
First Semester
DSA 4413 Algorithm Analysis 3
DSA 5103 Intelligent Data Analytics 3
Graduate Elective 6 3
Graduate Elective 6 3
 Credit Hours12
Second Semester
Graduate Elective 6 3
Graduate Elective 6 2
DSA 5900 Professional Practice 1-4
 Credit Hours9
 Total Credit Hours156
1

CHEM 1315 can be substituted with CHEM 1335 (Fall only). 

2

MATH 1823, MATH 2423, MATH 2433, and MATH 2443 sequence can be substituted for MATH 1914, MATH 2924, and MATH 2934

3

Engineering transfer students may take ENGR 3511 in place of ENGR 1411

4

To be chosen from the University-Wide General Education Approved Course List. Three of these hours must be upper-division (3000-4000). See list in the Class Schedule. 

5

These courses are dual-counted, fulfilling requirements for both the undergraduate degree and the graduate degree. 

6
To be approved by the DSA graduate liaison.