School of Chemical, Biological and Materials Engineering
This is an archived copy of the 2018-2019 catalog. To access the most recent version of the catalog, please visit http://ou-public.courseleaf.com.
Chemical engineering was first taught at OU in 1912 and the first graduate degree was granted in 1918. Over the years that followed, the program has developed curricula with traditional strength in fundamentals, while tailoring electives for specializations suited to contemporary and future industrial need. In 1963, the Schools of Chemical Engineering and Metallurgical Engineering were combined into the School of Chemical Engineering and Materials Science. The name was changed in 2008 to the School of Chemical, Biological and Materials Engineering (CBME). This was done to reflect the increasing activities in the bioengineering area.
Our dynamic faculty are dedicated to a program of the highest quality and to leadership at the forefront of the profession it serves. This dedication and the cooperative spirit of CBME faculty has fueled a superior level of productivity. The school has developed a very broad base of external research support. A listing of recent research projects shows support from 22 different sources, including the National Science Foundation, the U. S. Environmental Protection Agency, the U.S. Department of Energy, The Department of Defense, The National Institutes of Health, the Oklahoma Center for the Advancement of Science and Technology, and 10 companies. Every faculty member has an active research program and is expected to receive external funding.
The mission of the School of Chemical, Biological and Materials Engineering is to serve the changing needs of society through the training of outstanding engineers in the creation and utilization of chemical engineering knowledge.
Perhaps the most striking facts about chemical engineering are youth and variety. At the turn of the century people were discontented with simply observing chemical phenomena in the laboratory. Chemical engineering was born out of the desire to use these chemical behaviors to serve people and make the world a better place in which to live.
The world has entered an extremely critical period because of shortages and/or environmental impacts of nonrenewable energy. The chemical engineer is an important factor in solving problems in production and use of fossil fuel resources, nuclear energy and alternate energy resources, including biofuels and bioenergy. Chemical engineers have made important contributions to the production and refining of petroleum products. They are now playing an important part in liquefaction of natural gas and gasification of coal. The use of alternate energy sources such as biomass, geothermal, ocean thermal differences, and solar are dependent on contributions made by chemical engineers.
In the space age, chemical engineers are developing nanoengineered materials that will have structural and electronic properties never before encountered. They must perfect processes for life-support systems in other environments. Chemical engineers are needed to provide the fuels for rockets and booster propulsion. They utilize computers to control and analyze complex chemical processes.
Biotechnology and medicine, which have taken tremendous strides in the past few decades, are quite dependent on the efforts of the chemical engineer. It is the chemical engineer who develops ways to produce new recombinant proteins such as insulin at large scale for mass distribution. The vaccines that have saved a whole generation of children from crippling are available because the chemical engineer worked out the ways to produce them safely and economically. The field of mental health has been revolutionized by drugs, astronomical in cost until the chemical engineer mass-produced them so that they are accessible to nearly everyone who needs them.
Briefly, the job of the chemical engineer is to make commercial application of the chemist’s and biologist’s discoveries. This is not as easy as it sounds, for enormous problems are encountered when the company tries to produce by the ton material that the chemist made by the milligram in the laboratory. The chemical engineer works in a variety of industries, not only the chemical industry, but also in fields of computer systems, electronic materials, environmental control, pharmaceuticals, leather, metals, space, fertilizers, textiles, glass, detergents, paper, food, pesticides, paint, and rubber. New fields are constantly being added.
It is the chemical engineer who develops an economical process for producing a marketable product. The development of penicillin is just such a case. The chemist Sir Alexander Fleming discovered the wonder antibiotic in a Petri dish in his laboratory. The batches produced in a laboratory can hardly supply the millions of people around the world that need the drug, and the cost of a prescription would be exorbitant. Chemical engineers had to develop a continuous process for producing penicillin. Through the efforts of these engineers, millions of lives have been saved.
There are many other kinds of jobs for chemical engineers. A chemical engineer in plant operations must supervise the production process to see that the plant produces a scheduled amount of high-quality material economically. To do this, the engineer is very much involved in managing people and machines.
The research chemical engineer has an analytical mind and likes to solve problems in the technical frontier. If the engineer plans to concentrate on research, exploring new areas and applying untried methods, an advanced chemical engineering degree is probably needed.
Still another type of job appeals to many chemical engineers. This is technical sales. The material that is produced in a plant must be sold. The salesman needs extensive technical training because technical people are the customers.
All chemical engineering jobs — plant operations, research and development, and technical sales — may lead into management or executive positions if the chemical engineer is interested in the broad aspects of a company’s business.
There are, of course, major fields besides industry that need chemical engineers. College teaching, for instance, is offering more and more to the engineer, particularly if the person is research-minded. Many college teachers are, in addition, consultants to industry, and the government too is constantly improving the opportunities for chemical engineers in its service. Private research institutes call for chemical engineers. A chemical engineer may choose to work in practically any field.
The curriculum in chemical engineering at the University of Oklahoma is planned to prepare students for the design, construction, and operation of processes in which materials undergo chemical, biological, and physical change. Graduates are prepared to accept a job in chemical engineering practice or to continue studies in graduate school.
Since the chemical engineer must be acquainted with so many diversified subjects, the education at the University is necessarily broad. Students receive solid foundations in mathematics, physics, chemistry, and engineering courses which will prepare them to apply effectively these fundamental principles to the solution of engineering problems. In addition, students in the biotechnology engineering elective patterns receive training in our pre-medical/ biomedical life science and bioengineering courses. Because computers play a vital role in the solution of many chemical engineering problems, students are required to use modern computational tools in their coursework. In addition, there is increasing emphasis on electives in the life sciences and humanistic-social studies. Because of this broad educational background, the engineer is better prepared to accept leadership in the community, as well as in the company, in a management capacity.
Programs & Facilities
Laboratories and offices for chemical engineering are located in Sarkeys Energy Center, Carson Engineering Center, Stephenson Research and Technology Center. Facilities include a unit operations laboratory, separations and purification laboratories, polymers laboratories, small angle x-ray scattering laboratory, catalysis laboratories, biomass conversion and biofuels laboratories, thin films laboratory, biotechnology and biomedical laboratories, surfactants laboratories, and other graduate research project laboratories. We occupy several fully equipped laboratories in Carson Engineering Center focusing on applied surfactant technology and enhanced oil recovery. The facilities in Stephenson includes laboratory areas specifically designed for bioengineering research, and we occupy over 3,000 square feet of the space shared with the Bioengineering Center. Areas of research emphasis include biofuels and bioenergy, nano technology, remediation of polluted soil and water, process systems engineering, bone and vascular tissue engineering, rheology of blood, polymer fibers processing and polymer characterization, biotechnology and biomedical engineering, advanced design, catalysis, electrochemistry, surface modification using ultrathin films, carbon nanotube production, and natural gas utilization.
CHEMICAL, BIOLOGICAL AND MATERIALS ENGINEERING PROGRAM EDUCATIONAL OBJECTIVES
Our chemical engineering undergraduate program is preparing our recent graduates to meet the following objectives:
- Graduates will perform successfully as professionals in businesses, industries and government.
- Graduates will perform successfully in their pursuit of advanced degrees in chemical engineering and other technical or professional fields.
- Graduates will continually improve their professional competencies through further training or education.
Chemical Engineering Undergraduate Student Outcomes
(a) an ability to apply knowledge of mathematics, science, and engineering
(b) an ability to design and conduct experiments, as well as to analyze and interpret data
(c) an ability to design a system, component, or process to meet desired needs within realistic constraints such as economic, environmental, social, political, ethical, health and safety, manufacturability, and sustainability
(d) an ability to function on multidisciplinary teams
(e) an ability to identify, formulate, and solve engineering problems
(f) an understanding of professional and ethical responsibility
(g) an ability to communicate effectively
(h) the broad education necessary to understand the impact of engineering solutions in a global, economic, environmental, and societal context
(i) a recognition of the need for, and an ability to engage in life-long learning
(j) a knowledge of contemporary issues
(k) an ability to use the techniques, skills and modern engineering tools necessary for engineering practice
CURRICULUM IN CHEMICAL ENGINEERING
The Bachelor of Science in Chemical Engineering is accredited by the Engineering Accreditation Commission of ABET).
The degree is offered with three options:
The Standard Option prepares students for a career in the wide variety of chemical process industries or for graduate engineering studies. Technical electives allow emphasis on energy, materials, process systems, environment, or other areas of interest.
The Premedical/Biomedical Option is designed so that the student is prepared to enter schools of medicine, dentistry or osteopathic medicine as early as the end of the junior year (although most students who pursue a medical career complete the chemical engineering degree). If the student elects not to enter medical school, a normal chemical engineering degree is obtained, so there is no disadvantage to being in the program. Biology courses useful in preparation for the Medical College Admission Test are scheduled in the junior year. The biomedical engineering pattern is similar to the pre-med pattern, differing in suggested technical electives.
Pre-med students should consult their Pre-Health and Pre-Medical Professions advisor as well as their Chemical Engineering or Mechanical Engineering advisor for necessary medical school information.
The Biotechnology Option is designed to prepare the student for work on the engineering of biological systems and systems in which cells and biochemicals are processed. It includes courses in microbiology, biochemistry, and biochemical engineering. The elective sequence requires two additional credit hours over the basic chemical engineering curriculum.
ACCELERATED DUAL DEGREE B.S./M.S.
(Bachelor of Science portion of the program accredited by the Engineering Accreditation Commission of ABET)
- Bachelor of Science in Chemical Engineering: Standard/Master of Science (Chemical Engineering)
- Bachelor of Science in Chemical Engineering: Biotechnology/Master of Science (Biomedical Engineering)
- Bachelor of Science in Chemical Engineering: Premedical/Biomedical Engineering/Master of Science (Biomedical Engineering)
The School of Chemical, Biological and Materials Engineering offers three accelerated dual degree (B.S./M.S.) programs to qualified undergraduate students. The programs allow students to pursue a graduate degree in conjunction with the undergraduate degree requirements. One program is for the B.S. and Chemical Engineering M.S., while the other two are for the B.S. in Chemical Engineering and Biomedical Engineering M.S. Students admitted into these programs can use up to four courses (12 credit hours) to simultaneously satisfy the requirements of both the B.S. and M.S. degrees.
The School of Chemical, Biological & Materials Engineering offers master and doctor of philosophy degrees in chemical engineering. Research can be in a variety of areas including: advanced energy systems, biochemical and biomedical engineering, catalysis, process optimization, nanotechnology, novel separation methods, polymers, reaction kinetics, surface science, thermodynamics and thin films.
Any student with an undergraduate degree in chemical engineering or its equivalent from an accredited school and a grade point average (GPA) of at least 3.00 (on a 4.00 scale) during the last 60 hours of undergraduate coursework may be admitted as a student in full standing.
MASTER OF SCIENCE
The Chemical Engineering, Master of Science curriculum is available for students with an undergraduate degree in chemistry, physics, biology, or a similar area and high qualifications. Students who have their degree in an area other than chemical engineering will likely have to take additional courses besides those listed in the special curriculum. Interested students can contact the School for more information.
DOCTOR OF PHILOSOPHY
The School of Chemical, Biological and Materials Engineering offers the Doctor of Philosophy degree program in Chemical Engineering. Students can apply directly for the Ph.D. degree without obtaining an M.S. degree first.
CH E 2002. Introduction to Chemical Engineering Computing.2 Credit Hours.
Prerequisite: MATH 1823 or 1914 or concurrent enrollment. Introduction to engineering computing and programming using prevalent engineering computing software; program design and development; computer application exercises in engineering. (F, Su)
CH E 2033. Chemical Engineering Fundamentals.3 Credit Hours.
Prerequisite: CHEM 1415 or CHEM 1425 or CHEM 1435 or equivalent. Material balances involving physical equilibria and chemical reaction; energy balances; gas behavior including vapor pressure and Raoult's Law. (F)
CH E 3113. Momentum, Heat and Mass Transfer I.3 Credit Hours.
Prerequisite: CH E 2033; MATH 2443 or 2934 or concurrent enrollment in 2443 or 2934; completion or concurrent enrollment in PHYS 2524 and completion or concurrent enrollment in MATH 3113. The common mathematical and physical basis of these processes is presented. Calculation methods for all three processes are developed. Design procedures of equipment for fluid flow, heat transfer and diffusional processes are given. (Sp)
CH E 3123. Momentum, Heat and Mass Transfer II.3 Credit Hours.
Prerequisite: CH E 3113 and MATH 3113. The common mathematical and physical basis of these processes is presented. Calculation methods for all three processes are developed. Design procedures of equipment for fluid flow, heat transfer and diffusional processes are given. (F)
CH E 3313. Structure and Properties of Materials.3 Credit Hours.
Prerequisite: CHEM 1415 or CHEM 1425, PHYS 2524, and CHE 3473 or instructor permission. The behavior of materials under various conditions and environments is correlated to atomic and molecular structure and bonding. (Sp)
CH E 3333. Separation Processes.3 Credit Hours.
Prerequisite: 3123, 3473, 3723. Coverage of the fundamentals and modeling techniques of various separation processes found in the chemical process industries. Discussion of various computational approaches for binary and multicomponent separations; factors affecting efficiency, capacity and energy requirements. (Sp)
CH E 3432. Unit Operations Laboratory.2 Credit Hours.
Prerequisite: CH E 3123, CH E 3333 or concurrent enrollment in CH E 3333, and CH E 3473. Experimental examination of processes involving fluid flow, heat and mass transfer, kinetics and process control. Process parameters and physical properties are measured. Results are presented in written reports and oral presentations. Laboratory. (Sp)
CH E 3440. Mentored Research Experience.3 Credit Hours.
0 to 3 hours. Prerequisites: ENGL 1113 or equivalent, and permission of instructor. May be repeated; maximum credit 12 hours. For the inquisitive student to apply the scholarly processes of the discipline to a research or creative project under the mentorship of a faculty member. Student and instructor should complete an Undergraduate Research & Creative Projects (URCP) Mentoring Agreement and file it with the URCP office. Not for honors credit. (F, Sp, Su)
CH E 3473. Chemical Engineering Thermodynamics.3 Credit Hours.
Prerequisite: CH E 2033, CH E 3113, MATH 2443 or 2934. Application of the first and second laws of thermodynamics to the analysis of phase change, solution behavior and chemical equilibria and reaction. (F)
CH E 3723. Numerical Methods for Engineering Computation.3 Credit Hours.
Prerequisites: CHE 2002 (or concurrent enrollment in CHE 2002) and Mathematics 3113 or 3413. Course uses specific software applications tailored toward chemical engineering. Basic methods for obtaining numerical solutions with a digital computer. Included are methods for the solutions of algebraic and transcendental equations, simultaneous linear equations, ordinary and partial differential equations, and curve fitting techniques. The methods are compared with respect to computational efficiency and accuracy. Any student who earns credit for CH E 3723 cannot receive duplicate credit for AME 3723, C S 3723, or P E 3723. This course may not be taken for graduate credit within the College of Engineering. (F)
CH E 3960. Honors Reading.1-3 Credit Hours.
1 to 3 hours. Prerequisite: admission to Honors Program. May be repeated; maximum credit six hours. Consists of topics designated by the instructor in keeping with the student's major program. Covers materials not usually presented in the regular courses. (F, Sp, Su)
CH E 3970. Honors Seminar.1-3 Credit Hours.
1 to 3 hours. Prerequisite: admission to Honors Program. May be repeated; maximum credit six hours. The projects covered will vary. Deals with concepts not usually presented in regular coursework. (Irreg.)
CH E 3980. Honors Research.1-3 Credit Hours.
1 to 3 hours. Prerequisite: admission to Honors Program. May be repeated; maximum credit six hours. Provides an opportunity for the gifted Honors candidate to work on a special project in the student's field. Laboratory (F, Sp, Su)
CH E 3990. Undergraduate Research Experience.1-3 Credit Hours.
Prerequisite: permission of instructor. May be repeated; maximum credit six hours. Individual research projects for undergraduates in Chemical Engineering before their junior year, and for high performing undergraduates not in the Honors Program. (F, Sp, Su)
CH E G4153. Process Dynamics and Control.3 Credit Hours.
Prerequisite: 4473. Formulation of first-order models for storage tanks, chemical reactors and heated, stirred tanks; transient and steady-state process dynamics; three-mode control of unit operations; higher-order systems and counter-current operations; analog simulation and digital control of chemical processes. (F)
CH E G4253. Process Design & Safety.3 Credit Hours.
CH E G4262. Chemical Engineering Design Laboratory.2 Credit Hours.
Prerequisite: CH E 3432 and CH E 4253 or concurrent enrollment in CH E 4253. Experimental techniques for the acquisition of pilot plant data, using unit operations equipment and reactors for use in process design. Results are presented in written reports and oral presentations. Laboratory. (F)
CH E 4273. Advanced Process Design.3 Credit Hours.
Prerequisite: CH E 3333, CH E 4253, CH E 4262, CH E 4473, CH E 4153. Process and process equipment design, complete design of process plants including complete flow sheets, estimated plant costs, costs of process development, economics of investment. Results are presented in written reports and oral presentations. (Sp) [V].
CH E 4281. Engineering Co-Op Program.1 Credit Hour.
(Crosslisted with AME, CEES, C S, ECE, EPHY, ISE and BME 4281) Prerequisite: Departmental permission and junior standing. May be repeated; maximum credit 6 hours. The Co-Op program provides students an opportunity to enhance their education via career exploration in related professional work experiences. Course assignments help students articulate their experiences by completing journals; mid-term paper; final paper and/or final presentation. Faculty receive an evaluation from the student's Co-Op supervisor who monitors performance. Faculty collaborate with the Co-Op supervisor to ensure student success. (F, Sp, Su)
CH E G4473. Kinetics.3 Credit Hours.
Prerequisite: 3473, 3723, Mathematics 3113. Fundamentals of rates, homogeneous isothermal reactions, non-isothermal reactions, reactors and design, heterogeneous reactions, fixed and fluidized bed reactors, experimental data reduction, non-ideal flow reaction systems. (Sp)
CH E 4960. Directed Readings.1-4 Credit Hours.
1 to 4 hours. Prerequisite: good standing in University; permission of instructor and dean. May be repeated; maximum credit four hours. Designed for upper-division students who need opportunity to study a specific problem in greater depth than formal course content permits. (Irreg.)
CH E 4970. Special Topics/Seminar.1-3 Credit Hours.
1 to 3 hours. Prerequisite: Senior standing or permission of instructor. May be repeated; maximum credit nine hours. Special topics or seminar course for content not currently offered in regularly scheduled courses. May include library and/or laboratory research and field projects. (Irreg.)
CH E 4980. Senior Research.1-4 Credit Hours.
1 to 4 hours. Prerequisite: senior standing, permission. Selected students work with individual faculty members on research problems. Laboratory (F, Sp, Su)
CH E 4990. Independent Study.1-3 Credit Hours.
1 to 3 hours. Prerequisite: Senior standing and permission of instructor. May be repeated; maximum credit nine hours. Contracted independent study for a topic not currently offered in regularly scheduled courses. Independent study may include library and/or laboratory research and field projects. (Irreg.)
CH E 5143. Multi Scale Modeling of Matter.3 Credit Hours.
Prerequisite: graduate standing or permission of the instructor. The course is suitable for students who are already familiar with classical thermodynamics, differential and integral calculus. This course covers multiscale modeling methods at atomistic and meso scales. By a combination of method discussions and hands-on tutorials, students will learn fundamentals of structures and properties of matter. Both molecular dynamics simulation and Monte Carlo method will be discussed in detail. (F)
CH E 5163. Heterogeneous Catalysis.3 Credit Hours.
Prerequisite: CH E 4473; graduate standing or instructor permission. Physical characterization of heterogeneous catalysts; catalytic activity of metals, semiconductors, solid acids, and shape-selective materials. Theories of catalytic activity, catalytic reactors, basics of catalyst surface characterization and activity measurement. (F)
CH E 5183. Graduate Transport Phenomena.3 Credit Hours.
Prerequisite: CH E 3123, graduate standing in Chemical Engineering, or permission of instructor. Fundamentals of the theory of transport process; heat, mass, momentum transfer combined with chemical reactions; derivation of different equations to describe processes and process units; analytical and numerical solutions of systems of describing equations. (F)
CH E 5203. Bioengineering Principles.3 Credit Hours.
(Crosslisted with AME 5203 and BME 5203) Prerequisite: Mathematics 3113 and Physics 2524. Principles of bioengineering for the areas of the biomechanics of solids and fluids, mass transfer, biomaterials, electrical networks, imaging, and ionizing radiation as they apply to the human body. (F)
CH E 5243. Biochemical Engineering.3 Credit Hours.
(Crosslisted with BME 5243) Prerequisite: CH E 3123 or permission of instructor. Current bioprocesses for reaction and separation with emphasis on fundamental principles of chemical engineering, biochemistry, and microbiology. (Sp)
CH E 5293. Transport in Biological Systems.3 Credit Hours.
(Crosslisted with AME 5293 and BME 5293) Prerequisite: 3123 or permission of instructor. Theoretical and practical aspects of transport phenomena in living organisms and biomedical technologies. Applications include hemorheology, drug delivery, extracorporeal circulation, and artificial organs. (Irreg.)
CH E 5373. Tissue Engineering.3 Credit Hours.
(Crosslisted with BME) Prerequisite: graduate standing or permission of instructor. Examines the background and recent advances in the science of combining multiple cell types with an appropriate support to provide a construct that can replace or support damaged tissue. (Irreg.)
CH E 5453. Polymer Science.3 Credit Hours.
Prerequisite: graduate standing or permission. Nomenclature, synthesis, structure and properties of high polymers, survey of production, processing and uses of commercial polymeric materials. (Sp)
CH E 5463. Polymer Processing.3 Credit Hours.
Prerequisite: senior or graduate standing. The theory and practice of the production of finished polymer shapes (tubes, sheets, fibers, bottles, etc.) from polymeric raw materials. (Alt. F)
CH E 5480. Topics in Chemical Engineering.1-3 Credit Hours.
1 to 3 hours. Prerequisite: graduate standing or permission of instructor. May be repeated with change of content. Seminar course in specialized topics in chemical engineering. (Irreg.)
CH E 5513. Surface Characterization.3 Credit Hours.
Prerequisite: graduate standing or permission of instructor. Characterization of surfaces by (i) modern methods of instrumental analysis including diffraction, microscopic techniques, electron and ion spectroscopies and by (ii) absorption methods including physi- and chemisorption, combined with calorimetry, spectroscopy and temperature-programmed experiments. (Irreg.)
CH E 5523. Advanced Mathematical Methods in Science and Engineering.3 Credit Hours.
(Crosslisted with METR 5523) Prerequisite: graduate standing, CH E 3113 and MATH 2443 or MATH 2934. Scale and vector field theory. Ordinary and partial differential equations. Matrix algebra. Complex analysis. (F)
CH E 5533. Materials Design for Energy Application.3 Credit Hours.
Prerequisite: graduate standing or department permission. This course is focused on electrochemical engineering and its application in several energy-related research areas such as lithium ion batteries, fuel cells, and water electrolysis and photolysis. We will introduce basic principles of electrochemistry and materials science and discuss various issues in these energy-related applications and how to address them from a materials science and engineering perspective. (Irreg.)
CH E 5563. Properties and Applications of Porous Materials.3 Credit Hours.
Prerequisite: graduate standing or permission of instructor. Introduces the structure-properties relationships of several porous media (e.g. carbon nanotubes, zeolites, xerogels, etc.) with the intent of surveying some of the most important applications for each material. Includes discussion as to how experimental and theoretical tools are currently employed to investigate synthesis and properties of porous materials. (Irreg.)
CH E 5643. Natural Gas Utilization.3 Credit Hours.
Prerequisite: graduate standing or permission of instructor. Covers the uses of natural gas for combustion, power, LNG, gas conversion to chemicals and fuels, and gas transportation. (Alt. F)
CH E 5673. Colloid and Surface Science.3 Credit Hours.
(Crosslisted with CEES 5673) Prerequisite: graduate standing or permission of instructor. Capillarity, surface thermodynamics, adsorption from vapor and liquid phases, contact angles, micelle formation, solubilization, emulsions and foams. Applications to be discussed include detergency, enhanced oil recovery and adsorption for pollution control. (Irreg.)
CH E 5823. Advanced Numerical Methods.3 Credit Hours.
Prerequisite: CH E 3723 or equivalent and CH E 2002 or other introductory programming course or Permission of the Instructor or Graduate Standing. Students will learn numerical techniques not normally covered in undergraduate numerical methods courses, such as Rhomberg Integration, Chebyshev interpolation, and automatic step-size adjustment for numerical integration. Students will improve their proficiency in formulating the numerical solution to a mathematical problem using Excel with Visual Basic (VB). Students will develop a self-directed project involving numerical solution of a significant problem of interest to them personally or in their research. (Irreg.)
CH E 5843. Advanced Chemical Engineering Thermodynamics.3 Credit Hours.
Prerequisite: CH E 3473, graduate standing in Chemical Engineering, or permission of instructor. Advanced thermodynamics as applied to engineering problems and design. (F)
CH E 5960. Directed Readings.1-3 Credit Hours.
1 to 3 hours. Prerequisite: graduate standing and permission of department. May be repeated; maximum credit twelve hours. Directed readings and/or literature reviews under the direction of a faculty member. (F, Sp, Su)
CH E 5970. Special Topics/Seminar.1-3 Credit Hours.
1 to 3 hours. Prerequisite: Graduate standing or permission of instructor. May be repeated; maximum credit nine hours. Special topics or seminar course for content not currently offered in regularly scheduled courses. May include library and/or laboratory research and field projects. (Irreg.)
CH E 5971. Seminar in Chemical Engineering Research.1 Credit Hour.
Prerequisite: graduate standing in Chemical Engineering or permission of instructor. May be repeated with change of content; maximum credit four hours for the master's degree, 10 hours for the doctoral degree. Speakers from academia and industry elaborate on methods and results from research in their areas of expertise to provide the student with an appreciation of the problems of current interest in chemical engineering. (F, Sp)
CH E 5980. Research for Master's Thesis.2-9 Credit Hours.
Variable enrollment, two to nine hours; maximum credit applicable toward degree, six hours. Laboratory (F, Sp, Su)
CH E 5990. Independent Study.1-3 Credit Hours.
1 to 3 hours. Prerequisite: Graduate standing and permission of instructor. May be repeated; maximum credit nine hours. Contracted independent study for a topic not currently offered in regularly scheduled courses. Independent study may include library and/or laboratory research and field projects. (Irreg.)
CH E 6723. Advanced Kinetics and Reaction Engineering.3 Credit Hours.
Prerequisite: 4473 or graduate standing. Understanding and anaylsis of complex kinetics and reactor systems: free radical and cracking reactions, polymerization, biokinetics and catalytic kinetics with mass heat transfer limitations. Advanced reactor systems such as a catalytic fixed bed reactors in one- and two-dimensions, equilibrium limited reaction systems, fluidized and trickle bed reactors, etc. are considered. (F)
CH E 6960. Directed Readings.1-3 Credit Hours.
1 to 3 hours. Prerequisite: graduate standing or permission of instructor. May be repeated; maximum credit six hours. Directed readings and/or literature review under the direction of a faculty member. (Irreg.)
CH E 6970. Special Topics/Seminar.1-3 Credit Hours.
1 to 3 hours. Prerequisite: graduate standing or permission of instructor. May be repeated; maximum credit 12 hours. Special topics or seminar course for content not currently offered in regularly scheduled courses. May include library and/or research and field projects. (Irreg.)
CH E 6980. Research for Doctoral Dissertation.2-16 Credit Hours.
Laboratory (F, Sp, Su)
CH E 6990. Special Chemical Engineering Problems.1-2 Credit Hours.
1 to 2 Hours. Prerequisite: permission. May be repeated; maximum credit four hours. Special research problems are pursued by the students either as individuals or as a group under staff direction. (F, Sp, Su)
|Last Name||First/Middle Name||Middle init.||OU Service start||Title(s), date(s) appointed||Degrees Earned, Schools, Dates Completed|
|Crossley||Steven||2011||ASSOCIATE PROFESSOR OF CHEMICAL, BIOLOGICAL AND MATERIALS ENGINEERING, 2017; SAM A. WILSON PROFESSOR OF CHEMICAL ENGINEERING, 2017; ROGER AND SHERRY TEIGEN PRESIDENTIAL PROFESSOR, 2017||PhD, Univ of Oklahoma, 2009; BS, Univ of Oklahoma, 2004|
|Galizia||Michele||2017||ASSISTANT PROFESSOR OF CHEMICAL, BIOLOGICAL AND MATERIALS ENGINEERING, 2017||PhD, Univ of Bologna 2010; MS, Univ of Bologna, 2006|
|Gao||Jie||2018||ASSISTANT PROFESSOR OF CHEMICAL, BIOLOGICAL AND MATERIALS ENGINEERING, 2018||PhD, East China Univ of Science & Tech, 2010; BS, East China Univ of Science & Tech, 2005|
|Grady||Brian||1994||PROFESSOR OF CHEMICAL, BIOLOGICAL AND MATERIALS ENGINEERING, 2005; PRESIDENT'S ASSOCIATES PRESIDENTIAL PROFESSOR, 2006||PhD, Univ of Wisconsin, 1994; BS, Univ of Illinois, 1987|
|Harrison||Roger||G||1988||PROFESSOR OF CHEMICAL, BIOLOGICAL AND MATERIALS ENGINEERING, 2007; PROFESSOR OF BIOMEDICAL ENGINEERING, 2016||PhD, Univ of Wisconsin, 1975; MS, Univ of Wisconsin, 1969; BS, Univ of Oklahoma, 1967|
|Harwell||Jeffrey||H||1982||GEORGE LYNN CROSS RESEARCH PROFESSOR OF CHEMICAL, BIOLOGICAL AND MATERIALS ENGINEERING, 1999; ASAHI GLASS CHAIR OF CHEMICAL ENGINEERING, 2010||PhD, Univ of Texas, 1983; MS, Texas A&M, 1979; M Div, Western Conservative Baptist Seminary, 1977; BA, Texas A&M, 1974|
|Huang||Liangliang (Paul)||2014||ASSISTANT PROFESSOR OF CHEMICAL, BIOLOGICAL AND MATERIALS ENGINEERING, 2014||PhD, North Carolina State Univ 2012; BS, Nanjing Univ of Tech, 2003|
|Lobban||Lance||L||1987||FRANCIS W. WINN CHAIR IN CHEMICAL, BIOLOGICAL AND MATERIALS ENGINEERING, 2000; PROFESSOR OF CHEMICAL, BIOLOGICAL AND MATERIALS ENGINEERING, 2000; LLOYD G. AND JOYCE AUSTIN PRESIDENTIAL PROFESSOR, 2000||PhD, Univ of Houston, 1987; BS, Univ of Kansas, 1981|
|Nollert||Matthias||U||ASSOCIATE PROFESSOR OF CHEMICAL, BIOLOGICAL AND MATERIALS ENGINEERING, 1997||PhD, Cornell Univ, 1987; BS, Univ of Virginia, 1981|
|O'Rear||Edgar A.||1981||PROFESSOR OF CHEMICAL, BIOLOGICAL AND MATERIALS ENGINEERING, 1991; DIRECTOR, OKLAHOMA BIOENGINEERING CENTER, 2001; FRANCIS W. WINN PROFESSOR OF CHEMICAL, BIOLOGICAL AND MATERIALS ENGINEERING, 2001||PhD, Rice Univ, 1981; SM, Mass Inst of Tech, 1977; BS, Rice Univ, 1975|
|Papavassiliou||Dimitrios||1999||PRESIDENT'S ASSOCIATES PRESIDENTIAL PROFESSOR, 2006; PROFESSOR OF CHEMICAL, BIOLOGICAL AND MATERIALS ENGINEERING, 2009; C.M. SLIEPCEVICH PROFESSOR OF CHEMICAL ENGINEERING, 2014||PhD, Univ of Illinois, 1996; MS, Univ of Illinois, 1993; BS, Aristotle Univ, 1989|
|Razavi||Sepideh||2018||ASSISTANT PROFESSOR OF CHEMICAL, BIOLOGICAL AND MATERIALS ENGINEERING, 2018||PhD, City College of New York, 2015; MS, City College of New York, 2012; MS, Sharif Univ of Tech, 2007; BS, Arak Univ, 2005|
|Resasco||Daniel||E||1993||GEORGE LYNN CROSS RESEARCH PROFESSOR OF CHEMICAL, BIOLOGICAL AND MATERIALS ENGINEERING, 2003; GALLOGLY CHAIR IN ENGINEERING, 2016||PhD, Yale Univ, 1983; BS, Universidad Nacional del Sur, 1975|
|Shambaugh||Robert||L||1984||PROFESSOR OF CHEMICAL, BIOLOGICAL AND MATERIALS ENGINEERING, 1993||PhD, Case Western Reserve, 1976; BS, Case Western Reserve, 1970|
|Sikavitsas||Vassilios||2002||PROFESSOR OF CHEMICAL, BIOLOGICAL AND MATERIALS ENGINEERING, 2018; UNDERGRADUATE STUDIES CHAIR, 2016||PhD, SUNY at Buffalo, 2000; MS, SUNY at Buffalo, 1995; Diploma , Aristotle Univ, 1991|
|Walters||Keisha||B||2016||PROFESSOR OF CHEMICAL, BIOLOGICAL AND MATERIALS ENGINEERING, 2016; CONOCO/DUPONT PROFESSOR OF CHEMICAL ENGINEERING, 2016||PhD, Clemson Univ, 2005; MS, Clemson Univ, 2001; BS, Clemson Univ, 1996|
|Wang||Bin||2014||ASSISTANT PROFESSOR OF CHEMICAL, BIOLOGICAL AND MATERIALS ENGINEERING, 2014||PhD, École Normale Supérieure de Lyon, 2010; BA, East China Univ of Science & Tech, 2004|